RUSBX2™ – Low Voltage USB Data and Charging Plate
Dual USB 2.0 Amp Charging and Data Adapter
Anodized Aluminum Wall Plate with 2 x Type A Commercial USB ports
Low Voltage Contractor Installation
Forward Compatible with charging technologies
Installs in a standard outlet or electrical switch box
Highest quality components throughout
Install Locally at rack location or up to 1000 Ft for Charging and Data Transmission
Easy to install – Terminals are marked with cable color.
2 x Type A to Type B cables
Weather Resistant Design
- Description
- PRODUCT DOCUMENTS
- SPECIFICATIONS
Description
Introducing the RUSBX2 – Low Voltage USB CHarging and Data plate.
Rugged and Simple! It can be installed locally in a rack using our RP-6 rack plate or installed up to 1000ft away from the equipment rack using CAT5 wire. It’s a single gang plate that fits into a standard single gang box
Low Voltage Design
The RUSBX2 does not require an electrician for installation.
Upgrade Easily
QC3.0, QC2.0 Charging standard
Aluminum Black Anodized Panel
The black aluminum anodized panels will withstand vandalism and are superior to similar plastic controls which break easily. The engraved panel will ensure the channel markings can never be altered or removed.
| Technical Specifications | General | ||
| Charging Capabilities | 30 Watts / Channel @ 8 Ohms 50 Watts / Channel @ 4 Ohms |
Dimensions: | 4.5″H x 2.75W x 1.4″D |
| Frequency Response: | 20 Hz to 20 k Hz | Input Connector: | Terminal Block |
| Maximum Input Levels: | .5 Vrms | Output Connector: | Euroa Style Terminal Block – 2 x Orange |
| Power In Connector: | Euro Style Terminal Block – 1 x Black | ||
| THD+N: | .1% (VCC = 21V f=1 kHz, PO = 25W) | Power Required: | Local power via AC/DC adapter 15 to 24 Vdc. 1 to 5 amps. |
| Signal To Noise: | -102 dB (Max output at THD+N < 1%, f = 1kHz, Gain = 20 dB) | Aux Power Connector: | Terminal Block |
| Crosstalk: | -100 dB (VO = 1 Crms, Gain = 20dB, f = 1 kHz) | Mute Connector: | Terminal Block |
| Gain: | 17 dB (150 mv to 1.0 v) | ||
| Aux power out: | 15Vdc / 1 Amp | ||
| Input Sensitivity: | 30.5 dB | ||
| Input Impedance: | 11kOhms | ||
| Tone Controls: | Bass and Treble +/- 14dB | ||